ACR Electronics SmartReader Plus Instrukcja Użytkownika Strona 24
- Strona / 103
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
SmartReader Data Loggers
16
Copyright © 2010 ACR Systems Inc. All Rights Reserved.
2
External Temperature
Appendix C
3
External Relative Humidity
71
NOTE: When you activate either RH channel, you must also enable its
corresponding temperature channel, as well, in order to temperature compensate
the RH sensors.
Precautions
The SmartReader 2's RH Sensor is designed for long-term trouble-free performance, but there
are a few precautions to keep in mind to maximize the benefit it can give you.
· Never expose the sensor to organic solvents or ionic-laden liquids. Any chemical
compound that attracts polymers may affect the sensor.
· The RH sensor is particularly susceptible to contamination by sulfur gases and sulfur
compounds. DO NOT SMOKE NEAR THE LOGGER!
· Always return your SmartReader 2 to a resealable plastic bag during non-use to
maximize the in-calibration life of the RH sensor.
1.4.3 Accessories
You can obtain replacement RH Sensors, remote temperature probes, temperature and
relative humidity probes for use with your SmartReader 2.
ET Series Temperature Sensors
The ET Series Temperature sensors are thermistor probes that can be used easily with your
SmartReader 2 for remote temperature measurements. The advantage of these probes is
that they can be used for a wider range of temperatures, are more versatile (they can be used
to record fluid temperatures) and their small size permits them to be easily inserted in
hard-to-get-at-locations (such as in ductwork or under pipe insulation).
To use an ET Temperature probe with your SmartReader 2 you must first enable the logger's
external temperature channel. Connect the remote temperature probe by connecting one wire
(of the two-wire probe) to the channel marked Temperature and the other wire to the terminal
marked Common. For more information on ET series thermistor probes, refer to Appendix C
Thermistor Temperature Probes.
EH-020A Temperature and Relative Humidity Probe
The EH-020A is a four-wire probe with a temperature and relative humidity sensor. For
field-mounting convenience, it also has a magnetic backing and a security eyelet. To use the
EH-020A with your SmartReader 2, you must enable the logger's external temperature and
humidity channels. To connect the EH-020A probe to your SmartReader 2, follow instruction
- IMPORTANT! 1
- SmartReader Data Loggers 2
- TRADEMARK NOTICES 3
- LIMITED WARRANTY 4
- Table of Contents 5
- 1.1.1 Features 9
- 1.1.2 Description 10
- 1.1.3 Programmed Operation 10
- 1.1.5 How to Use SmartReaders 11
- 1.1.6 Specifications 13
- 1.1.7 Approvals 14
- SmartReader Software Driver 15
- 1.2.1 Logger Status 16
- 1.2.2 Logger Channels 18
- 1.2.2.2 Channel Calibration 20
- 1.3.1 Description 21
- 1.3.2 Setup 21
- Other Applications 22
- 1.4.1 Description 23
- 1.4.2 Setup 23
- 1.4.3 Accessories 24
- 1.4.4 Troubleshooting 25
- 1.4.6 Specifications 26
- 1.5.1 Description 28
- 1.5.2 Setup and Use 29
- A60FL / A65FL 29
- A70FL / A75FL 30
- 1.5.4 Specifications 31
- 1.5.5 Troubleshooting 31
- 1.6.1 Description 32
- 1.6.2 Setup 33
- 1.6.3 Pressure Calibration 34
- 1.6.4 Specifications 35
- 1.7.1 Description 37
- 1.7.2 Setup and Use 37
- 1.7.3 Specifications 38
- 1.7.4 Calibration 39
- 1.8.1 Description 41
- 1.8.2 Setup and Use 41
- 1.8.3 Specifications 42
- 1.8.4 Calibration 43
- 1.9.1 Description 45
- 1.9.2 Setup 45
- 1.9.3 Choosing Input Channels 48
- R = 200 / Iin 52
- 1.9.7 Specifications 59
- 1.9.8 Applications 60
- 1.10.1 Description 62
- 1.10.2 Setup and Use 62
- SmartReader 9 Pulse Logger 64
- 1.11.3 Quick-Start Tutorial 65
- 1.11.7 Specifications 69
- 1.12.1 Description 70
- 1.12.2 Setup 70
- 1.12.3 Accessories 71
- 1.12.4 Troubleshooting 72
- 1.12.6 Specifications 73
- Monitoring Resistance 75
- Temperature and 77
- Relative Humidity 77
- Calibration 77
- L" reading 79
- H" reading 79
- L - 170 x bH) / 428 79
- H - bL) - 1) 79
- L - 145 x bH) / 296 81
- Thermistor Temperature 82
- 1.15.4 Setup and Use 83
- 1.15.5 Specifications 84
- SmartReader Data Logger 89
- 1.15.7 Custom Probes 92
- 1.15.10 Probe Assemblies 95
- Sample Rates 97
Powiązane produkty i podręczniki dla Nawigatory ACR Electronics SmartReader Plus
(31 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.046 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji