ACR Electronics SmartReader Plus Instrukcja Użytkownika Pobierz pdf (Strona 15)

SmartReader Data Logger

1.2

SmartReader Software Driver

TrendReader software uses a software driver to communicate with SmartReader data loggers.

However, TrendReader software will not work with loggers with a serial number less than

20,000. The software driver takes the form of two windows. The Status window, shown when

you contact the logger, is used to display the settings currently stored in the data logger. The

Setup window, shown when you select Edit Setup, is used to alter the current settings and

apply the changes to the data logger. The settings are divided into two main sections: Status

and Channels. Status contains information about sampling and memory. Each channel of the

logger contains information about the description, equation and Realtime value, and calibration

associated with the channel. You can control the level of detail that you see for the settings by

clicking on the "+" and "-" buttons at the left side to expand and collapse the nodes.

When you want to clear the logger's memory and start a new logging session with new

parameters, select Edit Setup from TrendReader. In the Edit Logger Setup window, make

any necessary changes. To implement your changes, you can either click on Apply or OK.

OK will implement the changes and close the window whereas Apply will leave the window

open, thereby allowing you to make changes in other features.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 102 103

Brak uwag

ACR Electronics SmartReader Plus Instrukcja Użytkownika Strona 15